Elecsound Blog

Elecsound is a manufacturer of trimming potentiometers, pcbs, capacitors, leds and resistors

2-12 Layers PCB

As a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. our lead time for 1 and 2 layers are 7 days. and 4 layers are 10–14 days. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also.
2-12 Layers PCB
Material used: FR4, High Tg Minimum 170C, Hifrequency, Metal based: Aluminium ect.
Maximum Panel Size: 26″ X 26″ (660mm X 660mm)
Line Width & Spacing:
Minimum Line Width (Internal): 4 mil (0.1 mm) for mass production and 3mil for samples
Minimum Line Width (External): 4 mil (0.1 mm) for mass production and 3 mils for samples.
Minimum Line Spacing (External): 4 mil (0.1 mm) for mass production and 3 mils for samples.
Layer Count & Thickness: 2-12 layers
Minimum Thickness (2 Layers): 4 mil (0.1 mm)
Minimum Thickness (4 Layers): 12 mil (0.3 mm)
Minimum Thickness (6 Layers): 16 mil (0.4 mm)
Minimum Thickness (8 Layers): 24 mil (0.6 mm)
Maximum Thickness(10layers): 200 mil (5.0 mm)
Layer to Layer Registration: +/- 5 mil (0.13 mm)
Via / Drill Size: Minimum Drill Hole Diameter 10 mil (0.25 mm)
Minimum Via Size: 8 mil (0.2 mm)
Hole to Hole Tolerance: +/- 3 mil (0.08 mm)
Hole to Edge Tolerance: +/- 5 mil (0.13 mm)
Micro Via: 4 mil (0.1 mm)
Solder Mask: Solder Mask Bridge Between Solder Dam 3 mil (0.07 mm)
Warpage: 0.5 %
Impedance: +/- 10%
Surface Finish: Hard Gold / ENIG / HASL / Carbon Ink / OSP (ENTEK CU 106 AX) / Immersion Tin
Min. SMT Ptich: 12 mil (0.2 mm)
Min. Parts footpins: 0201
Products involved fields: Consume Electronics, Medical equipments, Industrial commands, communications, auto parts ect.

26 Layer PCB

As a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. our lead time for 1 and 2 layers are 7 days. and 4 layers are 10–14 days. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also.
26 layer video system PCB
Board thickness: 3.25mm
Copper thickness: 20um
Material: NELCO
Minimum holes: 0.25mm
Minimum line width/gap: 0.1mm/0.1mm
Electrostatic solder mask.  

26 Layer PCB

As a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. our lead time for 1 and 2 layers are 7 days. and 4 layers are 10–14 days. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also.
26 layer video system PCB
Board thickness: 3.25mm
Copper thickness: 20um
Material: NELCO
Minimum holes: 0.25mm
Minimum line width/gap: 0.1mm/0.1mm
Electrostatic solder mask.  

1-38 layer PCB

We could do 1-38 layer PCB
The surface finish we could do are HASL, enig, emmersion silver, gold plating, osp, gold finger, immersion silver.
The solder mask type we could do are: White, green, yellow, black, red, purple.
Our PCB capability:
Material used: FR4, High Tg Minimum 170C, Hifrequency, Metal based: Aluminium ect.
Maximum Panel Size: 26″ X 26″ (660mm X 660mm)
Line Width & Spacing:
Minimum Line Width (Internal): 4 mil (0.1 mm) for mass production and 3mil for samples
Minimum Line Width (External): 4 mil (0.1 mm) for mass production and 3 mils for samples.
Minimum Line Spacing (External): 4 mil (0.1 mm) for mass production and 3 mils for samples.
Layer Count & Thickness: 2-12 layers
Minimum Thickness (2 Layers): 4 mil (0.1 mm)
Minimum Thickness (4 Layers): 12 mil (0.3 mm)
Minimum Thickness (6 Layers): 16 mil (0.4 mm)
Minimum Thickness (8 Layers): 24 mil (0.6 mm)
Maximum Thickness(10layers): 200 mil (5.0 mm)
Layer to Layer Registration: +/- 5 mil (0.13 mm)
Via / Drill Size: Minimum Drill Hole Diameter 10 mil (0.25 mm)
Minimum Via Size: 8 mil (0.2 mm)
Hole to Hole Tolerance: +/- 3 mil (0.08 mm)
Hole to Edge Tolerance: +/- 5 mil (0.13 mm)
Micro Via: 4 mil (0.1 mm)
Solder Mask: Solder Mask Bridge Between Solder Dam 3 mil (0.07 mm)
Warpage: 0.5 %
Impedance: +/- 10%
Surface Finish: Hard Gold / ENIG / HASL / Carbon Ink / OSP (ENTEK CU 106 AX) / Immersion Tin
Min. SMT Ptich: 12 mil (0.2 mm)
Min. Parts footpins: 0201
Products involved fields: Consume Electronics, Medical equipments, Industrial commands, communications, auto parts ect.

Single-sided Aluminum-based PCB

We can manufacture 1, 000 models of PCB everyday. We are specialized in single-side PCB, double-side PCB, 4 layers PCB to 8 layers PCB with finish HAL, immersion Tin, Immersion gold, gold plated and Immersion Silver.
Single-sided Aluminum-based PCB
Min line width/space: 20mils
PCB Surface finish: Lead-free HASL
PCB thickness: 62mils
PCB Laminate: Aluminum-based
Copper thickness: 1 oz
Thermal Conductivity: 3W/mk

1 Layer FR-4 PCB

1 layer PCB board:
Technical details:
1)layer count: 1 layer
2)material details: 1.6mmFR-4(TG135-140), 2oz finished copper weight
Min. Board thickness:
0.4mm for 2 layers and 4 layers
0.8mm for 6 layers
3)Hot air finishing, lead free
4)Min line width/spacing: 0.2mm
5)Min, Hole size(aperture): 0.3mm, hole tolerance: +/-0.05mm
Min. Solder bridge: 0.08mm
Dimension tolerance: +/-0.1mm
6)Outline/profile/contour: CNC Routing, CNC milling
Drills: CNC
7)Lead time: 4-5 days for prototypes, 7-9 days for mass production
8)Certification: RoHS&UL
9)Application: Elevator power supply
10)Board size details and panelized details:
Each piece size: 233.4mm*139.23mm
Panelized details: None
Breaking off strips: None
11)circuit characteristic: Simple
Advantages: 1) Best quality and attractive price.
2)Best on time shipping
3)with E-test
4)Customer service
5)Instant quote
6)No minimum lot Requirements (Prototypes and small qty are both acceptable for us)
7)Ultra modern manufacturing facility  

Single-sided Aluminum-based PCB

As a leading manufacturer of pcb products, we are excellent expert in single-side PCB, double-side PCB, 4 layers PCB to 8 layers PCB with more than 10 years experiences. We are sure that all of our products are good quality, expecially you have tried, right. For price, you can find the same in China but not so good quality as ours.  Our lead time usually is 7–10 days. but it depends on qty and layers of the board.  With our professional service and our products I believe we can save you money and time.
Single-sided Aluminum-based PCB
Min line width/space: 20mils
PCB Surface finish: Lead-free HASL
PCB thickness: 62mils
PCB Laminate: Aluminum-based
Copper thickness: 1 oz
Thermal Conductivity: 3W/mk

Single Layer Aluminium-based PCB with Immersion Tin

As a leading manufacturer of pcb products. Elecsound  specialize in single-side PCB, double-side PCB, 4 layers PCB to 8 layers PCB With more than 10 years experiences. We are sure that all of our products are good quality. For price pls check above and will have set up charge for new items.  Our lead time usually is 7–10 days. but it depends on qty and layers of the board.  With our professional service and our products I believe we can save you money and time.  Just give a chance and have a try.
Single Layer Aluminium-based PCB with immersion tin
PCB Layer: Single layer
PCB Material: Aluminum-based
Board thickness: 1.6mm
Surface finish: Immersion Tin/Sn
Application field: LED, Automobile

What Is a String Potentiometer?

A string potentiometer is a type of linear measuring device that uses a spring loaded cable or “string” on a spool. These typically generate an electric signal based on the amount of cable that is pulled from the spool. Sometimes called “string pots” for short, the string potentiometer is common in many technical applications.
 
These devices were first developed for the aerospace industry in the 1960s. This technology allows aircraft engineers to closely monitor the position of control surfaces, such as ailerons and rudders. The use of string pots reaches far beyond aircraft, however, and potentiometers are frequently used in industrial automation and robotic systems.All types of potentiometers operate as variable resistors. This means that they are able to create many different amounts of electrical resistance, depending on their position. High levels of resistance slow the flow of electrical current, while low levels allow electricity to pass easily. Standard dimmer knobs on lights, for instance, are variable potentiometers that allow users to adjust the flow of current manually. A string potentiometer operates using the same principle.
 
The cable inside a string potentiometer is connected to a spring. As the end of the cable is pulled, it unwinds from the spool and causes the internal potentiometer to rotate. The spring return mechanism maintains tension on the cable in order to prevent slack, and also to pull the string back onto the spool when the end is released. Applications that use string potentiometers typically have the spool mounted securely in one place. The end of the cable is usually connected to a moving object, such as a sliding hydraulic rod or the arm of an industrial machine. Electrical resistance from the internal potentiometer increases as the cable is pulled and decreases as it is returns.
 
Signals from a string potentiometer can be used in several ways. Computers and industrial controllers are able to read the level of resistance and convert it into a distance measurement. A computer readout, for example, can display the height of a hydraulic cylinder in centimeters or inches. The resistance level generated from a string potentiometer can also be used directly in an electrical circuit in order to toggle a device once a preset threshold is met.
 
Not all string potentiometers have the same amount of accuracy. Some use very precise internal potentiometers, and are able to measure distance variations of under a centimeter. Generally, more precise devices are also more expensive. Many are contained in protective cases, which allow them to operate in wet or dirty environments without becoming damaged.


Elecsound Brand Trimming Potentiometers

Do you need any trimming potentiometers?  We offer “Elecsound” brand with competitive price,  very speedy delivery and very high quality.  And our products are well crossed to Bourns Brand.
 
3006  4.8×19 Rectangular/Multiturn/Trimming Potentiometer/Elecsound brand
3266  7.2×6.7 Square/Multiturn/Trimming Potentiometer/Elecsound brand
3296  10×9.5 Square/Multiturn/Trimming Potentiometer/Elecsound brand
3303 3mm SMD/Single Turn /cermet/ Industrial/Trimming Potentiometer/Elecsound brand
3306 6mm round/ Single Turn /cermet/ Industrial/Trimming Potentiometer/Elecsound brand
3309 6mm round/ Single Turn /cermet/ Industrial/Trimming Potentiometer/Elecsound brand
3318 6mm round/ Single Turn / Industrial/Trimming Potentiometer/Elecsound brand
3323  7×7 Square/ Single Turn /Trimming Potentiometer/Elecsound brand
3329  6.8×4.7 Circularity/ Single Turn /Trimming Potentiometer/Elecsound brand
3362   7×7.2 Square/Single Turn/Trimming Potentiometer/Elecsound brand
3386   9.6×9.6 Square/ Single Turn /Trimming Potentiometer/Elecsound brand
3540 WireWound Potentiomet  Precision Multiturn
3590 22mm Precision Multiturn Wire Wound Potentiometer/Elecsound brand
 
Elecsound – Your best choice for electronic components products. We are strong in trimming potentiometers, Pcbs, Capacitors, Resistors, Leds and ICs


«67891011121314151617181920»

Powered By Z-Blog 2.3 Avengers Build 180518

1996-2018 © Copyright Elecsound Technology Co,. Ltd All Rights Reserved