Elecsound Blog

Elecsound is a manufacturer of trimming potentiometers, pcbs, capacitors, leds and resistors

1 Layer and 2 Layers PCB

Pls allow to me to recommend our PCBs to you again,as we really offer much better price than before,but keep the same quality,we can offer single-side, double-side, 4 layers to 8 layers,can make HAL, Gold plated, immersion gold, SMOBC. Our lead time is only 7 to 10 days.  All we need for a quote is  the quantity you need and a Gerber file of your PCB.
Now I am offering our price for single and two layer for your reference,
1 layer
2 layers
We can accept prototypes and small series but price is different
Pls check,if you are interested,welcome to email me,I am ready to quote any time.

1 Layer PCB

Now pls help check if you need any PCBs. as a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also.
Here is our 1 layer pcb as below.
Layer count: one
Base material: KB CEM-1
Board thickness: 1.6mm
Copper thickness: 1/0oz
Surface finish: HAL, OSP or gold plating
RoHS-marked

Organic Board Coatings

The term ‘organic board coatings’ covers two distinct types of coating. The first type, and the older of the two, is a relatively thick ‘varnish’ applied to the whole of a tin-lead finished board in order to preserve its wettability during storage. Remnants of the coating are generally removed by cleaning after soldering. [This type of coating must be distinguished from solder resist, a heat resistant organic coating, with openings at the solder lands, which is intentionally non-wettable by solder.]
The second type of organic coating, and by far the most common nowadays, is a vanishingly thin protective coating, applied just to the bare copper, which disappears during the actual soldering process.

Elecsound best electronic component-PCB

A PCB is a printed circuit board, also known as a printed wiring board. It is used in electronics to build electronic devices. A PCB serves two purposes in the construction of an electronic device; it is a place to mount the components and it provides the means of electrical connection between the components.
A PCB starts out as a thin, non-conducting sheet of material. The most common material used is a glass fiber epoxy laminate material. A thin layer of copper is then chemically deposited on each side of this material.
Our PCB factory is located in Fuyong Town, Shenzhen, with more than 300 workers and advanced equipment for printing circuit board. We are mainly focus in single layer board, 2 layers board, 4 layers board and 6 layers. Surface Treatment are HAL board, Gold-fingered board, blind buried Orifice board, high TG boards, aluminum based board, Immersion Tin board, Immersion Gold board and so on. Our lead time is only 7 to 10 days. All we need for a quote is the quantity you need and a Gerber file of your PCB. It’s fast and easy and the quality is great.

Single-side PCB to 8 Layers PCB

We are specialized in single-side PCB, double-side PCB, 4 layers PCB to 8 layers PCB with finish HAL, immersion Tin, Immersion gold, gold plated and Immersion Silver.   Email us your gerber and you will get the best service and best prices.

Single Layer PCB

Pls allow me to recommend our Single Layer PCB to you. we can offer reasonable prices, good quality and fast lead time. we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also. Here is the production discription.
PCB Materials: FR-4
Packing: Vacuum
PCB Layer Number: 1
Board thickness: 1.0-1.6mm, 1.6- mm
Copper clad: 10Z
Surface technique: Lead-free HASL; OSP; Gold plated PBF HAL
Minimum hole size: 0.40mm
Minimum Line/Space: 0.2mm/0.2mm (4mil/4mil)
Solder mask: White/Black/Green/Red/Yellow/Blue/Gray…
Forming: Punching/CNC Milling/CNC V-CUT
PCB Testing: E-testing; Flying probe testing
Lead Time: Sample 5-7days; Mass production 7-15days

3 Layers PCB

We can offer single-side, double-side, 4 layers to 8 layers,can make HAL, Gold plated, immersion gold, SMOBC. Our lead time is only 7 to 10 days.  All we need for a quote is  the quantity you need and a Gerber file of your PCB. Here is our 3 layers rigid flexible PCB. =

2-12 Layers PCB

As a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. our lead time for 1 and 2 layers are 7 days. and 4 layers are 10–14 days. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also.

1-30 Layer PCB

Now we have the hot offer as the hot weather.. that is our PCB products. Pls check the below unbelievable low prices but keep same high quality as usual. even for small qty we will keep the same unit price. Do you need order any pcb recently? Why not try Elecsound? I believe with same unit price you can’t get same quality from others.
1)layer: 1-30 layer
2)Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 Halogen Free
3)Board thickness: 0.2mm-7mm
4)Max. Finished board side: 500mm*500mm
5)Min. Drilled hole size: 0.25mm
6)min. Line width: 0.075mm(3mil)
7)min. Line spaceing: 0.075mm(3mil)
8)Surface finish/treatment: HASL lead free, Chemical tin, Chemical Gold
9)Copper thickness: 0.5-4.0oz
10)Solder mask color: Green/black/white/red/blue/yellow
11)Inner packing: Vacuum packing, Plastic bag
12)Outer packing: Standard carton Packing
13)Hole tolerance: PTH: ± 0.076, NTPH: ± 0.05
14)Certificate: UL, ISO9001, ISO14001, RoHS, CQC
15)profiling punching: Routing, V-CUT, Beveling
16)providing OEM service to all sorts of printed circuit board assembly

26 Layer PCB

As a manufacturer of PCBs, we can offer reasonable prices, good quality and fast lead time. we can offer 1 layer, two layers, 4 layers and 6 layers. and we can offer HAL, OSP and immersion gold and so on.  Rohs is valiable also. our lead time for 1 and 2 layers are 7 days. and 4 layers are 10–14 days. And pls note that we have no minimum quantity for PCBs,we can accept any quantity you need.The price will be competitive also.

«12345»

Powered By Z-Blog 2.3 Avengers Build 180518

1996-2018 © Copyright Elecsound Technology Co,. Ltd All Rights Reserved